My family plays a lot of crib and I've seen many crib boards through my life and I've always wanted to make one that included storage for both cards and pegs. I've done a few with the Rockler hole template but it's a pain to drill all the holes and you'd have to include the cards on the back side which forces it to be thicker to avoid clashing with the holes from above. I got this hole pattern off Amazon and measured a typical set of cards and pegs. I made a separate lid so that I could customize them for whomever I was making them for and I included holes for the magnets to keep the lid on. I won't share the cut files since I had to pay for the hole pattern but it's a fairly easy carve to create in V-Carve.
